ECU 数据库 ›
FIAT › FIAT STRADA 1.3L 16V MJET 70kW/94HP MJ8DF/8F2
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 6 固件版本
车辆数据
| 品牌 | FIAT |
| 型号 | STRADA |
| 发动机 | 1.3L 16V MJET 70kW/94HP MJ8DF/8F2 |
| 原厂功率 | 95 CV / 7 kW |
| 排量 | 1300 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
| 制造商 | MARELLI |
| 型号 | MJD8F3 |
| 存储 / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Engine efficiency
- EGR valve control
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda value of the smoke limitation
- Max torque profile
- Max torque profile - AT
- Max torque profile - MT
- Specific injection pressure limiter for EFT sensor
- Rail pressure threshold for torque limitation
- Specific injection pressure
- Air mass flow
- RPM step reference
- Driver torque request
- Driver torque request Sport mode
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle - steady state
- Variable geometry duty cycle - transient state
固件标识 (6)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| MJ8F3HW00A | 1953S220 |
1.00.030 | — |
MARELLI MJD8F3 |
| MJ8F3HW00A | 1953S120 |
1.00.015 | — |
MARELLI MJD8F3 |
| MJ8F3HW00A | 1953S320 |
1.00.008 | — |
MARELLI MJD8F3 |
| MJ8F3HW00A | 1953L121 |
1.00.013 | — |
MARELLI MJD8F3 |
| MJ8F3HW00A | 3050S525 |
1.01.010 | — |
MARELLI MJD8F3 |
| MJ8F3HW00A | 3050S425 |
1.01.008 | — |
MARELLI MJD8F3 |
车辆技术说明
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU 说明
Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
