ECU 数据库 ›
FIAT › FIAT 500 L (351,352) 0.9L 8V TwinAir Turbo 77kW/103HP IAW8GSW
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 7 固件版本
车辆数据
| 品牌 | FIAT |
| 型号 | 500 L (351,352) |
| 发动机 | 0.9L 8V TwinAir Turbo 77kW/103HP IAW8GSW |
| 原厂功率 | 105 CV / 77 kW |
| 排量 | 900 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | MARELLI |
| 型号 | 8GSW |
| 存储 / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
可用的调校选项:
- Spark advance during acceleration
- Advance at part load
- Advance correction
- Base lambda - cold
- Base Lambda - hot
- Boost pressure limiter
- Electronic throttle control
- Compressor pressure ratio limit for pumping and speed
- Average power effective limitation
- Average torque effective limitation
- Advance limiter
- Basic value setpoint Lambda sensor
- Maximum Upstream pressure in event of Normal boost modality
- Maximum Upstream pressure in event of normal boost modality, Sport mode activated
- Maximum Upstream pressure in event of overboost modality
- Maximum Upstream pressure in event of overboost modality, Sport modality activated
- Max torque profile
- Torque management Sport mode
- Power Control in Normal mode
- Power Control in Sport mode
- Resistant torque table
- Take-off torque law in Normal mode
- Take-off torque law in Normal mode with power control
- Take-off torque law in Sport mode
- Take-off torque law in Sport mode with power control
- Wastegate duty-cycle
固件标识 (7)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| MM8GSWHW607 | D3D1FS60 |
1.91.013 | — |
MARELLI 8GSW |
| MM8GSWHW607 | D432FS6A |
1.91.003 | — |
MARELLI 8GSW |
| MM8GSWHW607 | D3E5FS5B |
1.91.008 | — |
MARELLI 8GSW |
| MM8GSWHW607 | D3C2FS9P |
1.91.011 | — |
MARELLI 8GSW |
| MM8GSWHW608 | D432FS1C |
1.91.004 | — |
MARELLI 8GSW |
| MM8GSWHW608 | D3E5FR62 |
1.91.007 | — |
MARELLI 8GSW |
| MM8GSWHW608 | D432FS66 |
1.91.003 | — |
MARELLI 8GSW |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU 说明
Microprocessor FMPC 5565 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
