CITROEN NEMO 1.4L 8V HDI 50kW/67HP EDC16C34

ECU BOSCH EDC16C34 · 68 CV (5 kW) · 1400 cc · Diesel sovralimentato

ECU 数据库CITROEN › CITROEN NEMO 1.4L 8V HDI 50kW/67HP EDC16C34

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌CITROEN
型号NEMO
发动机1.4L 8V HDI 50kW/67HP EDC16C34
原厂功率68 CV / 5 kW
排量1400 cc
燃料Diesel sovralimentato
车辆类型LCV

ECU

制造商BOSCH
型号EDC16C34
存储 / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure in aftertreatment modes
  • Boost pressure F (temperature)
  • EGR valve control
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Injection period in aftertreatment modes 4
  • Injection period in aftertreatment modes 5
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Injection in aftertreatment modes 3
  • Torque limiter 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed - AT
  • Driver torque request for low speed - AT
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Take-off torque law in Normal mode
  • Variable geometry duty cycle limit in regeneration mode
  • Variable geometry duty cycle limit in regeneration mode 2

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
9666151780 1.67.0051037391711 BOSCH EDC16C34
9667204480 1.67.0021037391735 BOSCH EDC16C34
9666432480 1.67.0081037391714 BOSCH EDC16C34

ECU 说明

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata