CHRYSLER CROSSFIRE 3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1

ECU BOSCH ME2.8 · 334 CV (246 kW) · 3200 cc · Benzina sovralimentato

ECU 数据库CHRYSLER › CHRYSLER CROSSFIRE 3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌CHRYSLER
型号CROSSFIRE
发动机3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1
原厂功率334 CV / 246 kW
排量3200 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME2.8
存储 / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

可用的调校选项:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Boost limiter correction for APS/BPS sensor
  • Load / throttle position reference
  • Engine filling management
  • RPM Limiter
  • RPM limiter for LSD
  • Boost pressure linearization
  • Speed limiter
  • Maximum indicated torque
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Relative permissible torque from the pedal position in torque limitation
  • Requested engine filling
  • Variable intake pulsation correction

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
11215365791037365248 1.16.009 BOSCH ME2.8
11215365791037365234 1.16.014 BOSCH ME2.8
11215387791037377841 1.16.020 BOSCH ME2.8

车辆技术说明

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU 说明

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.