AUDI S6 (4K/C8) 3.0L V6 24V TDI 253kW/240HP MD1CS014
ECU BOSCH MD1CS014 · 344 CV (253 kW) · 3000 cc · Diesel mild hybrid - MHEV
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
1 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | S6 (4K/C8) |
| 发动机 | 3.0L V6 24V TDI 253kW/240HP MD1CS014 |
| 原厂功率 | 344 CV / 253 kW |
| 排量 | 3000 cc |
| 燃料 | Diesel mild hybrid - MHEV |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MD1CS014 |
| 存储 / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period limit
- Injection period limit 3
- Injection period limit 4
- Injection period limit 5
- Injection opening time related to inj. pressure
- Injection 1
- Injection 2
- J
- Injection 4
- Injection 5
- Torque limiter 2
- L
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Lambda value of the smoke limitation
- Speed limiter
- Maximum absolute effective torque
- Maximum engine power
- Max torque profile - AT
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Driver torque request 2
- Driver torque request 3
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Start of injection
- Setpoint maximum turbocharger speed
- Setpoint maximum turbocharger speed 2
- Engine oil pressure target
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Turbocharger volumetric efficiency
固件标识 (1)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|---|---|---|---|
| — | — | 1.02.032 | 4K0907589C 0001 | BOSCH MD1CS014 |
ECU 说明
Micro Infineon Tricore TC299TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
读写此 ECU 的工具
其他 AUDI
100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP