AUDI RS6 (C5/4B) 4.2L V8 32V BITURBO 331kW/444HP ME7.1.1

ECU BOSCH ME7.1.1 · 450 CV (331 kW) · 4200 cc · Benzina sovralimentato

ECU 数据库AUDI › AUDI RS6 (C5/4B) 4.2L V8 32V BITURBO 331kW/444HP ME7.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 10 固件版本

车辆数据

品牌AUDI
型号RS6 (C5/4B)
发动机4.2L V8 32V BITURBO 331kW/444HP ME7.1.1
原厂功率450 CV / 331 kW
排量4200 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure limit control
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Optimal engine moment
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Throttle angle management

固件标识 (10)

硬件号软件号 (chip)版本升级软件ECU
02612078571037367265 1.42.0164D1907558 0003 BOSCH ME7.1.1
02612078571037367564 1.42.0094D1907558 A801 BOSCH ME7.1.1
02612078571037367724 1.42.0244D1907558 0004 BOSCH ME7.1.1
02612078571037366304 1.42.0434D1907558 0002 BOSCH ME7.1.1
02612080511037366111 1.42.0114D1907558B 0001 BOSCH ME7.1.1
02612080511037368087 1.42.0094D1907558B 0002 BOSCH ME7.1.1
02612081411037366443 1.42.0074D1907558C 0001 BOSCH ME7.1.1
02612082391037368085 1.42.0124D1907558D 0003 BOSCH ME7.1.1
02612086231037369763 1.42.0164D1907558E 0001 BOSCH ME7.1.1
02612087281037370934 1.42.0154D1907558F 0001 BOSCH ME7.1.1

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.