English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

AUDI RS4 (8K/B8) 4.2L V8 FSI 331kW/444HP MED17.1.1

ECU BOSCH MED17.1.1 · 450 CV (331 kW) · 4200 cc · Benzina aspirato

ECU 数据库 › AUDI › AUDI RS4 (8K/B8) 4.2L V8 FSI 331kW/444HP MED17.1.1

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 2 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

您是修理厂或调校师吗？

车辆数据

品牌AUDI
型号RS4 (8K/B8)
发动机4.2L V8 FSI 331kW/444HP MED17.1.1
原厂功率450 CV / 331 kW
排量4200 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.1
存储 / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

  • Engine ignition timing versus temperature
  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • Engine speed limitation at high motor temperature
  • Engine speed limit temperature based
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Throttle angle management

固件标识 (2)

硬件号软件号 (chip)版本升级软件ECU
—— 1.94.0218T2907560 0003 BOSCH MED17.1.1
—— 1.94.0258T2907560 0005 BOSCH MED17.1.1

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件 您是修理厂或调校师吗？自己提供这些服务：激活您的 TuningFile 平台

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius The Genius OBD + Bench € 2.500 购买

其他 AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ 所有 ECU AUDI