AUDI A8 (D3/4E) 4.2L V8 16V 250KW/340HP ME7

ECU BOSCH ME7.1.1 · 340 CV (25 kW) · 4200 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A8 (D3/4E) 4.2L V8 16V 250KW/340HP ME7

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌AUDI
型号A8 (D3/4E)
发动机4.2L V8 16V 250KW/340HP ME7
原厂功率340 CV / 25 kW
排量4200 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Air mass flow

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
02612011461037393279 1.42.0154E0910560Q 0030 BOSCH ME7.1.1
02612011461037376046 1.42.0124E0910560Q 0010 BOSCH ME7.1.1
02612081471037393273 1.42.0104E0910560E 0040 BOSCH ME7.1.1

车辆技术说明

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.