AUDI A7 (4G8) 3.0L V6 24V TFSI 220kW/295HP SIMOS8.5

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.5 · 299 CV (22 kW) · 3000 cc · Benzina sovralimentato

ECU 数据库AUDI › AUDI A7 (4G8) 3.0L V6 24V TFSI 220kW/295HP SIMOS8.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 8 固件版本

车辆数据

品牌AUDI
型号A7 (4G8)
发动机3.0L V6 24V TFSI 220kW/295HP SIMOS8.5
原厂功率299 CV / 22 kW
排量3000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商CONTINENTAL-SIEMENS-VDO
型号SIMOS 8.5
存储 / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

  • Base timing
  • Lambda/AFR full load/WOT
  • Boost pressure limiter
  • Desired engine load calculation
  • Maximum torque limitation at clutch
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda reference
  • Lambda driver wish
  • Knock detection factor
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

固件标识 (8)

硬件号软件号 (chip)版本升级软件ECU
4G0907551 1.33.0154G0907551 0007 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4H0907551 1.33.0034G0907551 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K0907551C 1.33.0194G0907551F 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0034G0907551F 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551A 1.33.0054G0907551A 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0054G0907551F 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551 1.33.0044G0907551 0008 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0134G0907551F 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5

车辆技术说明

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU 说明

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop