ECU 数据库 ›
AUDI › AUDI A6 (C7/4G) 2.0L 16V TDI 110kW/148HP EDC17C64
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 22 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | A6 (C7/4G) |
| 发动机 | 2.0L 16V TDI 110kW/148HP EDC17C64 |
| 原厂功率 | 150 CV / 11 kW |
| 排量 | 2000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C64 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost limiter correction for APS/BPS sensor
- Protection for cylinder head overheating
- Engine load - ceiling
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Engine idle vs. ECT sensor
- Engine idle vs. ECT sensor 2
- Engine idle vs. ECT sensor 3
- Engine idle vs. ECT sensor 4
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period - correction
- Maximum injection period
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- L
- Boost pressure deviation limits for overboost detection
- Boost pressure deviation limit for underboost detection
- Boost pressure deviation limit for underboost detection 2
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 4
- Lambda value of the smoke limitation 5
- Maximum indicated torque
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for fuel overheating
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure limiter for EOT sensor
- Relative permissible torque from the pedal position in torque limitation
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Q
- Specific air mass charge - correction
- Specific air mass charge - correction 2
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Setpoint maximum turbocharger speed
- Overboost timing
- Overboost timing 2
- Overboost timing 3
- Overboost timing 4
- Turbocharger volumetric efficiency
固件标识 (22)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.94.005 | 04L906021CG 8511 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906021GT 4840 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906021AM 3502 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906021CF 8468 |
BOSCH EDC17C64 |
| — | — |
1.94.016 | 04L906021BS 8465 |
BOSCH EDC17C64 |
| — | — |
1.94.022 | 04L906021BC 0746 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906021AM 9971 |
BOSCH EDC17C64 |
| — | — |
1.94.021 | 04L906021BC 9971 |
BOSCH EDC17C64 |
| — | — |
1.94.014 | 04L906021BS 8252 |
BOSCH EDC17C64 |
| — | — |
1.94.017 | 04L906021BT 8264 |
BOSCH EDC17C64 |
| — | — |
1.94.008 | 04L906021CC 8257 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906021CF 8262 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906021CF 8348 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906021CG 8261 |
BOSCH EDC17C64 |
| — | — |
1.94.014 | 04L906021CG 8349 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906021GT 3829 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906021AM 0744 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906021GS 3831 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906021GS 3979 |
BOSCH EDC17C64 |
| — | — |
1.94.002 | 04L906021BC 9972 |
BOSCH EDC17C64 |
| — | — |
1.94.034 | 04L906021AM 0656 |
BOSCH EDC17C64 |
| — | — |
1.94.016 | 04L906021BC 0657 |
BOSCH EDC17C64 |
车辆技术说明
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU 说明
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
