AUDI A6 (C5/4B) 4.2L V8 32V 331KW/444HP ME7.5

ECU BOSCH ME7.5 · 450 CV (331 kW) · 4200 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A6 (C5/4B) 4.2L V8 32V 331KW/444HP ME7.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌AUDI
型号A6 (C5/4B)
发动机4.2L V8 32V 331KW/444HP ME7.5
原厂功率450 CV / 331 kW
排量4200 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.5
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Exhaust gas temperature
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
02612089211037376069 1.00.0114F0910560E 0010 BOSCH ME7.5

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.