AUDI A3 (8P) 1.6L 16V FSI 85kW/114HP MED9.5.10

ECU BOSCH MED9.5.10 · 116 CV (85 kW) · 1600 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A3 (8P) 1.6L 16V FSI 85kW/114HP MED9.5.10

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 2 固件版本

车辆数据

品牌AUDI
型号A3 (8P)
发动机1.6L 16V FSI 85kW/114HP MED9.5.10
原厂功率116 CV / 85 kW
排量1600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED9.5.10
存储 / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter 2
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Throttle angle management

固件标识 (2)

硬件号软件号 (chip)版本升级软件ECU
0261S020211037382143 1.85.01203C906056AE 9275 BOSCH MED9.5.10
0261S023791037382597 1.85.01703C906056ED 0236 BOSCH MED9.5.10

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU located in the engine bay behind/close to the battery. Difficulty: easy

ECU 说明

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop