P2135 — Throttle Position Sensor Disagreement
| Meaning | The Motore computer compares two different sensors that measure how far down Il tuo gas pedal is pressed. When these two signals do not match up properly, the computer gets confused and triggers this code a keep the Macchina safe. |
| Family | Powertrain (P) |
Typical symptoms
The accelerator pedal may Ferma responding normally
A Attenzione light appears on Il tuo Pannello di Controllo
Common causes
Worn-out internal parts inside the throttle position sensor
An issue with the Principale computer wiring harness
What a do
Domande Frequenti
What does code P2135 mean?
Throttle Position Sensor Disagreement. The Motore computer compares two different sensors that measure how far down Il tuo gas pedal is pressed. When these two signals do not match up properly, the computer gets confused and triggers this code a keep the Macchina safe.
Can I keep driving with code P2135 Attivo?
With caution: limp mode possible, have it checked soon
Common causes — P2135
A bad connection oppure corrosion in the wiring plug alle the throttle body Worn-out internal parts inside the throttle position sensor An issue with the Principale computer wiring harness
How do you fix code P2135?
Have a technician check the wiring plug and terminals alle the throttle body Prima, as loose oppure dirty pins are very common here. Because this affects Il tuo ability a control the Motore speed, you should have it checked promptly.
We are ECU specialists: diagnosis, file repair and remapping for Auto, bikes, Camion and Agricoli vehicles.
ContattaciRelated codes
- P2100 — Throttle Actuator Control Motor Circuit/aperti
- P2101 — Throttle Actuator Control Motor Circuit Range/Performance
- P2102 — Throttle Actuator Control Motor Circuit Low
- P2103 — Throttle Actuator Control Motor Circuit Alta
- P2104 — Throttle Actuator Control System - Forced Idle
- P2105 — Throttle Actuator Control System - Forced Motore Shutdown
- P2106 — Throttle Actuator Control System - Forced Limited Potenza
- P2107 — Throttle Actuator Control Module Processor
- P2108 — Throttle Actuator Control Module Performance
- P2109 — Throttle/Pedal Position Sensor "A" Minimum Ferma Performance
- P210A — The cable a component K38/3(Starter lockout relay) has shor...
- P2110 — Throttle Actuator Control System - Forced Limited RPM