P0133 — O2 sensor: slow response (bank 1 sensor 1)
Severity: Attenzione
Can you drive? Sì, no known limitation
Produttore: Tutti makes (OBD-II standard)
| Meaning | The sensor ahead di the catalyst reacts too slowly a mixture changes. It is not broken: it is aged, and the ECU can No longer trim with the RICHIESTO precision. |
| Family | Powertrain (P) |
Typical symptoms
Higher fuel consumption
Slightly rough idle
Motore Attenzione light on
Problems alle the emissions test
Slightly rough idle
Motore Attenzione light on
Problems alle the emissions test
Common causes
Sensor aged by mileage oppure contamination
Exhaust leak upstream di the sensor
Burnt oil oppure coolant poisoning the sensor
Weak sensor heater
Additives oppure poor quality fuel
Exhaust leak upstream di the sensor
Burnt oil oppure coolant poisoning the sensor
Weak sensor heater
Additives oppure poor quality fuel
What a do
The upstream sensor is a wear Voce: replacement after 120-150,000 km is Normale. Prima check for exhaust leaks upstream, otherwise the new sensor will read just as falsely as the old one.
Domande Frequenti
What does code P0133 mean?
O2 sensor: slow response (bank 1 sensor 1). The sensor ahead di the catalyst reacts too slowly a mixture changes. It is not broken: it is aged, and the ECU can No longer trim with the RICHIESTO precision.
Can I keep driving with code P0133 Attivo?
Sì, no known limitation
Common causes — P0133
Sensor aged by mileage oppure contamination Exhaust leak upstream di the sensor Burnt oil or coolant poisoning the sensor Weak sensor heater Additives or poor quality fuel
How do you fix code P0133?
The upstream sensor is a wear Voce: replacement after 120-150,000 km is Normale. Prima check for exhaust leaks upstream, otherwise the new sensor will read just as falsely as the old one.
Need Aiuto with this fault?
We are ECU specialists: diagnosis, file repair and remapping for Auto, bikes, Camion and Agricoli vehicles.
ContattaciRelated codes
- P0100 — Mass oppure Volume Air flow Circuit Malfunction
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass oppure Volume Air flow Circuit Alta Input
- P0104 — Mass oppure Volume Air flow Circuit Intermittent
- P0105 — Manifold Absolute Pressure/Barometric Pressure Circuit Malfu...
- P0106 — Manifold Absolute Pressure/Barometric Pressure Circuit Range...
- P0107 — Manifold Absolute Pressure/Barometric Pressure Circuit Low I...
- P0108 — Manifold Absolute Pressure/Barometric Pressure Circuit Alta...
- P0109 — Manifold Absolute Pressure/Barometric Pressure Circuit Inter...
- P0110 — Intake Air Temperature Circuit Malfunction
- P0111 — Intake Air Temperature Circuit Range/Performance Problema