P0123 — Throttle Position Sensor Circuit Alta Input
| Meaning | The Motore computer is receiving a voltage signal Da the throttle position sensor that is higher than the maximum expected limit. This usually means the sensor is Invio bad Dati Chi Siamo how far the accelerator pedal oppure throttle valve is aperti. |
| Family | Powertrain (P) |
Typical symptoms
The Macchina might hesitate oppure not respond properly quando ti press the gas pedal
The Veicolo may go into a safety limp mode with very limited Potenza
Common causes
Damaged, corroded, oppure shorted wiring in the sensor harness
Internal failure within the Motore control module
What a do
Domande Frequenti
What does code P0123 mean?
Throttle Position Sensor Circuit Alta Input. The Motore computer is receiving a voltage signal Da the throttle position sensor that is higher than the maximum expected limit. This usually means the sensor is Invio bad Dati Chi Siamo how far the accelerator pedal oppure throttle valve is aperti.
Can I keep driving with code P0123 Attivo?
With caution: limp mode possible, have it checked soon
Common causes — P0123
Faulty throttle position sensor oppure accelerator pedal position sensor Damaged, corroded, or shorted wiring in the sensor harness Internal failure within the Motore control module
How do you fix code P0123?
You should have a mechanic inspect the wiring harness and connectors near the throttle body Prima. Drive the Macchina as little as possible until it is checked, because unpredictable throttle response creates a serious safety risk on the road.
We are ECU specialists: diagnosis, file repair and remapping for Auto, bikes, Camion and Agricoli vehicles.
ContattaciRelated codes
- P0100 — Mass oppure Volume Air flow Circuit Malfunction
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass oppure Volume Air flow Circuit Alta Input
- P0104 — Mass oppure Volume Air flow Circuit Intermittent
- P0105 — Manifold Absolute Pressure/Barometric Pressure Circuit Malfu...
- P0106 — Manifold Absolute Pressure/Barometric Pressure Circuit Range...
- P0107 — Manifold Absolute Pressure/Barometric Pressure Circuit Low I...
- P0108 — Manifold Absolute Pressure/Barometric Pressure Circuit Alta...
- P0109 — Manifold Absolute Pressure/Barometric Pressure Circuit Inter...
- P0110 — Intake Air Temperature Circuit Malfunction
- P0111 — Intake Air Temperature Circuit Range/Performance Problema